>If not, I'll see about reverse engineering the pinout at
>some point. I guess the best method would be to generate
>a 3V 50Hz square wave to use as the backplane signal, then
>feed it through an inverter to get the segment signal.

I would start by looking at it at an angle in a suitable bright light so you
can see the metalisation pattern on the glass, to work out where the segment
lines come out.

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist