I am planning on sending a board to Olimex to be fabricated.
I am still laying out the board, my question is this page

http://www.olimex.com/pcb/index.html
indicates
FR-4, thickness 1.5mm (0,062"), copper 35um (1oz),
Can I assume this is 1 oz/ft^2 as required by the
Track width calculator page ?

Track width calculator located here.
http://www.desmith.com/NMdS/Electronics/TraceWidth.html

TIA,
Kevin

Max Current for the application is 1.4A @ 8.4V.
So that tells me I should use a track width of 65mils with
25 mils of clearance, correct ?

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist