In SX Microcontrollers, SX/B Compiler and SX-Key Tool, Peter Van der Zee wrote:

Thanks Tim;

Sorry about my error in 5.1; I sould have said ctrl-I instead of ctrl-L.

When triggering the DEBUG command, your configuration appears instead to be effecting the PROGRAM/RUN command instead of the DEBUG command. It blows away (or never generates) the the extra instructions required for debug at locations $777 through $FFF. Very strange indeed.

I was able to get something similar to happen (but not identical), and I wanted you to perform exactly the same steps I was for a comparison. In my case I CAN get the debug code to be generated, but then only to have the IDE blow it away.

I'm trying to get enough info together to cause the problem under the most simple circumstances possible so that PJMonty can have the easiest go at figuring out this problem. I have'nt got to that state yet.

For curiosity, do you have the identical problem if you use the IDE Version 2.3 or the Version 28L ?

Thanks for your help,

Cheers,

Peter (pjv)

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=2&m=99162#m101413

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2005 (http://www.dotNetBB.com)