On 12/16/05, Olin Lathrop <olin_piclist@embedinc.com> wrote:
> Harold Hallikainen wrote:
> > Newer stuff is SMT with in circuit programming with the ICD-2.
> > On the Promate and Promate II, we were able to do DOS batch files to
> > drive the programmer. The production people just put the chip in the
> > socket, hit a key to select which product they're doing, and wait for
> > it to be done. No digging through MPLAB!
>
> My ProProg (http://www.embedinc.com/proprog) can be operated like that too,
> but it also has a button right on the unit.  The supplied software has
> the -LOOP command line option which causes the same HEX file to be
> programmed every time the button is pressed.
>

Actually I mean real DOS, the 16bit DOS. Promate II supports DOS but not
Promate III. I do not think ProProg will work with real 16bit DOS.

Regards,
Xiaofan

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist