Lee Jones wrote:
> Using ICD2 running from USB power, I reverted to "ICD2 Supplies
> Power" mode.  Still wouldn't bulk erase.  PIC Vdd wasn't going up
> at all.  So power from ICD2 in USB mode to target PIC is very
> low or nonexistant.  (I didn't have a external power supply handy
> to plug into the ICD2's coaxial power jack, so I don't know if
> that would have resolved the issue.)

I thought the ICD2 was not specified to supply any target power when it is
powered from USB.  It's been a while since I looked over that part of the
docs, so I may be a little off, but my first reaction would be to assume it
can't without explicitly verifying that it can.


******************************************************************
Embed Inc, Littleton Massachusetts, (978) 742-9014.  #1 PIC
consultant in 2004 program year.  http://www.embedinc.com/products
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist