In SX Microcontrollers, SX/B Compiler and SX-Key Tool, Rsadeika wrote:

Preliminary experience with the SX52 proto board with a 75MHz oscillator, did not get it to work in stand-alone. For a power source I used a 6v 4.0Ah rated at 1 amp @ initial current battery (did not have a wall-wart that put out 1 amp). That pretty well matched the requirements of the power regulator on the board. So, I guess I will be using either a 4 or 50MHz crystal, since that works without any problems, so far.
 

I am starting to notice a pattern here, when I have the SX-key installed, the programs run as expected. When I use it in a stand-alone, without the SX-key, then weird things start to occur, and that is when I use a wall-wart or a battery as the source of power.

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=99738#m99903

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2005 (http://www.dotNetBB.com)