Ian Chapman wrote:
> I'd be grateful if anyone can confirm whether, with the CCP module of a
> PIC16F818 in "special event trigger" mode, the I/O pin associated with
> CCP behaves as a normal digital output controlled by its PORTB bit.
>   
<snip>
I tried using a 12F683 CCP in special event mode (as a frequency out), 
and also wanted to use the GP2 int (same pin as CCP on 12F683)  - 
couldn't get it to work. The simulator (7.22) crashes (and MPLAB exits) 
when it hits the CCP init code. I gave up and used the TMR1 counter. I 
assumed the 2F683 was trying to do to much on too few pins?
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist