Olin Lathrop wrote:
> > First, the jumpers J2 and J3 must be to the RF2/RF3 position.
Right.  I had them set that way.
>
> > Also there is no filtering on PGD.  I keep saying this, but I don't 
> get any
> feedback from you that you've done anything about it.  Put 47pF caps to
> ground on the PGC and PGD lines close to J1.  I would solder them 
> right to
> the bottom of the connector.
You haven't had any feedback from me on that, correct.  That is because 
I have not yet done it, being kind of hesitant to solder stuff onto that 
board until you looked at the schematic.  After all, even though I saw 
no reason why it should not work, there was always the chance that you 
would immediately spot something that gave it a thumbs down.  But now 
that you have looked at it, and see no reason why it should not work, 
then I guess I'll take that next step, of tacking on the caps.

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist