I use a band saw - 10" Delta benchtop unit - then sand the edge to remove 
the burr.



----- Original Message ----- 
From: "Lee McLaren" <lmclaren@tasnet.net>
To: "pic microcontroller discussion list" <PICLIST@mitvma.mit.edu>
Sent: Monday, November 28, 2005 2:54 AM
Subject: [OT] Cutting PCB


> Hi,
>
> Can anyone suggest a good way to cut fiberglass printed circuit board, I 
> currently use the old score with a Stanley knife but its very slow and I 
> am concerned that when I bend the pcb to break it off that the pcb is 
> getting bent slightly forever.
> I have tried an electric tile cutter which looks like a saw blade without 
> teeth which is coated with something hard like diamonds, it work ok but is 
> slow and creates a lot of dust.
>
>
> regards
>
> Lee McLaren
> -- 
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
> 


-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist