Thanks for your recommendation Xiaofan, I was planning to build WISP628 some time back and I even emailed Wouter for the PCB but as my existing programmer was chugging along I kept it postponing. Regards, Chetan On 12/1/05, Chen Xiao Fan wrote: > Sorry I could not help you with Winpic. My suggestion is to try > out Wisp628A (from Wouter) with xwisp2 V1.8.1 (from Rob Hamerling). > (http://www.voti.nl/xwisp) --> general info including schematics > (http://www.robh.nl/) --> host software and V1.10 firmware > > Either buy a assembled Wisp628A from Wouter and update the firmware > to V1.10 or build it by you own. In the later case, get a 16F628A, > program it (using WinPIC) with the Wisp628A 1.10 firmware. Spend less > than 2 hours and you will have a Wisp628A on breadboard if you have > the components. The added bonus: this works under Windows/Linux/Mac OS X > and OS/2. I understand that you are using Linux from previous posts. > It is quite reliable as well. > > Regards, > Xiaofan -- Chetan Bhargava Web: http://www.bhargavaz.net Blog: http://microz.blogspot.com -- http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist