Chetan Bhargava wrote: >I'm trying to add support for PIC16F716 to Winpic. So far after 3-4 >hrs of jostling, I'm able to program the code memory but having >problems programming the config word. Sorry I could not help you with Winpic. My suggestion is to try out Wisp628A (from Wouter) with xwisp2 V1.8.1 (from Rob Hamerling). (http://www.voti.nl/xwisp) --> general info including schematics (http://www.robh.nl/) --> host software and V1.10 firmware Either buy a assembled Wisp628A from Wouter and update the firmware to V1.10 or build it by you own. In the later case, get a 16F628A, program it (using WinPIC) with the Wisp628A 1.10 firmware. Spend less than 2 hours and you will have a Wisp628A on breadboard if you have the components. The added bonus: this works under Windows/Linux/Mac OS X and OS/2. I understand that you are using Linux from previous posts. It is quite reliable as well. Regards, Xiaofan 12F629 +16F688 16F84 +16F913 18F2431 +18F2680 18F452 18F6620 +12F635 +16F689 16F84A +16F914 +18F2455 18F4220 +18F4520 18F6621 12F675 +16F690 16F87 +16F916 18F248 18F4221 +18F4525 18F6680 +12F683 16F716 16F870 +16F917 +18F2480 18F4320 +18F4550 18F6720 16F627 16F73 16F871 +16F946 +18F2510 18F4321 18F458 18F8410 16F627A 16F737 16F872 18F1220 +18F2515 18F4331 +18F4580 18F8490 16F628 16F74 16F873 18F1320 18F252 +18F4410 +18F4585 18F8520 16F628A 16F747 16F873A 18F2220 +18F2520 18F442 +18F4610 18F8525 16F630 16F76 16F874 18F2221 +18F2525 +18F4420 +18F4620 18F8585 +16F636 16F767 16F874A 18F2320 +18F2550 18F4431 +18F4680 18F8620 16F648A 16F77 16F876 18F2321 18F258 +18F4455 18F6410 18F8621 16F676 16F777 16F876A 18F2331 +18F2580 18F448 18F6490 18F8680 +16F684 16F818 16F877 +18F2410 +18F2585 +18F4480 18F6520 18F8720 +16F685 16F819 16F877A 18F242 +18F2610 +18F4510 18F6525 +16F687 16F83 16F88 +18F2420 +18F2620 +18F4515 18F6585 (+) fully supported with Wisp628 1.10 -- http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist