Hi,

I'm trying to program PIC16F716 using winpic but it is not working.
Has anyone tried this before? I have added a 16F716 section into
device.ini (basically a copy of 16F628A) and have modified several
parameters.

Somehow the programming doesn't start. I have changed the programming
begin and end commands from the PIC16F716 prog specs.

Would appreciate some help.

Regards,

Chetan


[PIC16F716]
info1= PIC16F716 added by Chetan
info2=
DeviceName=PIC16F716
DeviceInfoFileName=PIC16F716.dev
CodeMemType=1
CodeMemSize=2048
DataEEPROMSize=0
InternalRAMSize=128
AddrConfigMem=0x2000
AddrConfigWord=0x2007
AddrDataMem=0x2100
AddrOscCalib=0xFFFFFFFF
ConfigMemUsedLocs00_1F=0x00CF
ConfigMemUsedLocs20_3F=0x0000
DeviceIdAddr=0x2006
DeviceIdMask=0x3FE0
DeviceIdValue=0x1140
CanRead=0
;EraseAlgo=ERASE_16F62xA
EraseAlgo=16Fxx
;CodeProgAlgo=16Fxx
CodeProgAlgo=16Fxx
ConfigProgAlgo=CONFIG_MEM_16xxx
;DataProgAlgo=DATA_EEPROM_16XXX
VppVddSequence=Vdd_before_Vpp
Ti_Clock_us=5
Ti_Prog_us=10000
Ti_Erase_us=10000
CmdLoadConfig=0
CmdLoadProg=2
CmdReadProg=4
CmdIncrAddr=6
;CmdBeginProg=8
CmdBeginProg=18
;CmdEndProg=14
CmdEndProg=E
CmdLoadData=3
CmdReadData=5
CmdEraseProg=9
CmdEraseData=11
CmdEraseChip=-1
CmdBeginProgNoErase=-1
Cfgmask_unused=0x1E00
Cfgmask_unknown=0x0000
Cfgmask_cpbits=0x2000
Cfgmask_cpd=0x0100
Cfgmask_pwrte=0x0008
Cfgmask_inv_pwrte=0x0008
Cfgmask_wdte=0x0004
Cfgmask_oscillator=0x0013
Cfgmask_osc_rc=0x0013
Cfgmask_osc_hs=0x0002
Cfgmask_osc_xt=0x0001
Cfgmask_osc_lp=0x0000
Cfgmask_osc_extclk=0x0003
Cfgmask_osc_intrc_noclkout=0x0010
Cfgmask_osc_intrc_clkout=0x0011
Cfgmask_osc_extrc_noclkout=0x0012
Cfgmask_lvp=0x0080
Cfgmask_boden=0x0040
Cfgmask_mclre=0x0020
Cfgmask_ddebug=0x0000
Cfgmask_wrcode=0x0000
Cfgmask_bandgap=0x0000
Cfgmask2_used_bits=0x0000

--
Chetan Bhargava
Web: http://www.bhargavaz.net
Blog: http://microz.blogspot.com

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist