In SX Microcontrollers, SX/B Compiler and SX-Key Tool, Rsadeika wrote:

Jon,

I just looked at your "attach" file, looks good. I would like to bring up one thing for you to maybe think about. Since this is an "Elements ... ", you may want to start out with a better explanation of the programming tenplate first.

I noticed that in the help file, under example projects, programming template, you show a version of a proper template. In the IDE, when you request a new SX/B file you are presented with a template that uses a paging concept. This could be a little confusing.

As for the template itself, maybe a brief expansion of some of the absolutely necessary items that have to belong in an SX/B program. For example, in the device settings, what really has to be there. Crystal selection; with the SX tech kit you receive a couple of crystals, are these some parts that fell of the board, and now it is up to you to figure out where they go. INTERRUPT, when should that selection be made, or does it always have to be in there, ..., etc.

Since this is a mixed crowd (assemblers, PBASIC, SX/B, and beginners), you may want to keep in mind that every viewer will have to be satisfied. This is not meant to be a critique, but just an observation as to what might be a point of interest for some people. Just something to consider.

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=98661#m98740

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2005 (http://www.dotNetBB.com)