At 11:27 AM 11/29/2005, John Waters wrote: >Hi All, > >We are using the 3M "Matte silver polyester Printable Label Sheet" >to make some lables to stick on the enclosures of the devices we >manufacture, but we have very low productivity yield for these >labels, due to the followings:- We use the TLS-2200 in both stand-alone and computer-driven modes. Many of their labels are both CSA & UL approved for use as spec labels suitable for indoor and outdoor use. The last is quite a feat, as anyone who has had to go through the many tests needed to verify compliance can testify. Both the machine and the consumables are fairly expensive unless you purchase from eBay (I do). dwayne -- Dwayne Reid Trinity Electronics Systems Ltd Edmonton, AB, CANADA (780) 489-3199 voice (780) 487-6397 fax Celebrating 21 years of Engineering Innovation (1984 - 2005) .-. .-. .-. .-. .-. .-. .-. .-. .-. .- `-' `-' `-' `-' `-' `-' `-' `-' `-' Do NOT send unsolicited commercial email to this email address. This message neither grants consent to receive unsolicited commercial email nor is intended to solicit commercial email. -- http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist