In SX Microcontrollers, SX/B Compiler and SX-Key Tool, tdg8934 wrote:

SX/B "Serial" LCD firmware is written and working - No BS2 required. 
 

I have written SX/B code to work with a SX28 (NO BS2 REQUIRED) and the Parallax Serial LCD. Either Parallax model (#27976 Non Backlit) or (#27977 Backlit version) will work well. It works almost identically to the Parallax docomentation with example subroutines provided to display a DATA message , create custom characters and turn the backlight off or on. Other subroutines can be easiliy created using my example subroutines and the Parallax documentation. 

 

[url=http://www.parallax.com/detail.asp?product_id=27976]http://www.parallax.com/detail.asp?product_id=27976[/url]

[url=http://www.parallax.com/detail.asp?product_id=27977]http://www.parallax.com/detail.asp?product_id=27977[/url]

 

It was a good first SX/B project to work on. 

 

Let  me know what you think and if you want to use it on the Parallax website (as is or modified is ok). 

 

Thanks,


Timothy Gilmore

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=95955#m96072

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2005 (http://www.dotNetBB.com)