Hmm.  On digging a little deeper I think might want to use
a DS2482-100 i2c to 1-wire protocol converter.  Does anyone know of
some good routines that hide a lot of detail I really don't
want or need to know?

Drew

> 
> You might want to consider a couple of Schottky diodes to save blowing your
> I/O pins ;-)
> 
> 
> -marc
> 
> On 11/2/05, Jan-Erik Soderholm <jan-erik.soderholm@telia.com> wrote:
> >
> > drew@technteach.com wrote :
> >
> > > I see the application note on programming the pic for 1-wire.
> > >
> > > But what do I need in the way of line drivers between the
> > > pic and the connector to the outside world?
> >
> > Nothing but the mandatory pullup resistor.
> > But there are "drivers" for longer distances.
> >
> > See:
> >
> > http://www.maxim-ic.com/1-Wire.cfm
> >
> > Regards,
> > Jan-Erik.
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist