On 29 Oct 2005, at 15:05, Robert Payne wrote:
> I have just put together a JDM programmer from this site:-
>
> http://feng3.cool.ne.jp/en/pg5v2.html
>
> It works a treat !!!!!!!!
>
> So far I have used it to program an 18F2550 (amongst others)  
> without a problem so I would imagine that
> it would do the rest of the chips you mention. Software used was  
> WinPic800.

Excellent, thanks. I'll check it out.

> One problem (see my previous post) that with WinPic800 software I  
> could not program on com2
> (com 1 is fine) although other software such as ICprog worked  
> equally well on both com ports.
>
> Hope this helps.
>
> BTW what is make magazine?

http://makezine.com/

-- 
Andy Armstrong, hexten.net

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist