OK I lied.  I have another question.  When I layed out
the board, I used the autorouter to place the traces,
then moved some around the way I liked.  All the
settings for the autorouter were set to the defaults. 
Are there any particular settings that I should change
or tweak?  This is a very simple, 2-layer through-hole
design.

Thanks again
-Mark


--- Mark Chauvin <chauvin555@sbcglobal.net> wrote:

> Ah.  That makes more sense.  It confused me because
> the yellow circle shows up on either layer holes or
> drills - don't have it in front of me right now. 
> Btw,
> as an Autocad user, I find Eagle very easy to use. 
> Love the way you can type the commands in.
> 
> One more question.  I need to send this in to be
> prototyped.  I was looking at pcbexpress.com;
> they'll
> do a simple 2-layer board for $80.  Anyone have
> experience with them, or a better company to go
> with?
> 
> Thanks.
> -Mark
> 

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist