"Mark Chauvin" said:

> and the yellow  
> circle is the drill size.  If that's true, then how can the drill size be  
> bigger than the solder pad?

It's not the drill size - it's a drill bit positioning guide. Turn off all the layers (Tools->Layers or View->Layers iirc) except Top, Bottom, tPlace, bPlace and Dimension. The green donut is the pad, the drill hole is the hole in the middle of the donut.

Later,
Phil.
philpem@dsl.pipex.com
http://www.philpem.me.uk/

-----------------------------------------
This message sent by OakMailer, a free/donation-ware script
provided by Oakbox Productions http://www.oakbox.com.

Anti-spam notice, this message originated from IP Address:
			      161.112.232.17
-----------------------------------------
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist