Hi, list.

Have anyone installed Wisp628 1.10 firmware? I am trying to use it with
XWisp2 1.8.00 (Rob=B4s software) but after issuing the  "XWisp2w erase"
command with a 16F88 all I get is:

C:\MCHIP\Therm335>XWisp2w erase
  xwisp2 version 1.8.00 for Windows (Oct 09 2005, Open Watcom C 1.30)
Programmer Wisp628, firmware version 1.10
SendReceiveFast read timeout, received 2 of 5
SendReceiveSlow read timeout, 0 bytes received
SendReceiveFast read timeout, received 2 of 5
SendReceiveSlow read timeout, 0 bytes received
Target not found in configuration table
Target not auto-detected, please specify on commandline!
xwisp2 failed after 4.00 seconds, rc 23!

I don=B4t know what could be wrong because when I try the "xwisp.py erase=
"
(from Wouter=B4s python software)and it works fine, as in this:


C:\MCHIP\Therm335>xwisp.py erase
XWisp 1.08, command line mode
C:\Archivos de Programa\XWisp\serialwin32.py:88: DeprecationWarning:
integer arg
ument expected, got float
   win32file.SetCommTimeouts(self.hComPort, timeouts)
hardware: Wisp628 1.10 (fast)
target: 16f88, revision 05 (ID=3D0765)
OK

What could be happening?

Regards,

*Carlos Marcano*
-Guri, Venezuela-


--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist