Peter wrote:
>>
Padu,

your inits sound good (even if don't know anything about =B5Pascal, so I =
hope
:=3D means a LET or "=3D" in Basic). 68K is also perfect for this test.

Two things come into my mind:
1. May be you already killed your PIC by hardwiring RA0 to +5V.
2. Are you sure, your PIC is running? Is any LED blinking? If not, there
also would be no init, which could explain.

Peter
<<


Yes, :=3D is assignment in pascal. The pic is working. My program involve=
s=20
LED's, compactflash and USART, everything works fine. Right now everythin=
g=20
is on a development board (mikroelektronika easypic2).
On RA1 I have an ACS750 (current sensing) that outputs VCC/2 to VCC level=
s=20
and I'm reading it perfectly. One test I didn't perform but you reminds m=
e=20
of doing is trying to read the ACS750 on RA0 and see if I get the same=20
results.

I cannot do any tests until next Monday. Today I'm taking off to Vegas to=
=20
watch the Darpa Grand Challenge :)

Cheers

Padu=20

--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist