On 9/30/05, philpem@dsl.pipex.com wrote: > Hi folks, > I'm trying to design a HV power supply to drive a DG7-32 CRT tube. I need > the following outputs: > +6V AC/DC - heater supply. Isolated from everything else. 300mA > minimum. suggesting DC filtered supply, will be much easy if will be generated by a switching filtered supply > +400V DC - deflection amplifiers usually this need at least 20-50mA and need to be well filtered. The current is as high as higher would be the scope bandwith. > +300V DC - CRT anode > -300V DC - brightness and focus control > -200V DC - cathode don't forget the shut down circuitry for the reversal movement of the spot try the same methode used by a TV or CRT HV supply, one transformer for all. cheers, Vasile > > Basically, what I want is something like the power supply circuit at > but without the huge mains > transformer. Ideally I want to run it off a 12V (or thereabouts) supply - > i.e. a rechargeable battery pack (probably NiMH but equally likely a 14.4V > 2AH Li-ion). > > Does anyone have any suggestions? I was thinking of using a switchmode > supply for the HV, but I haven't heard of any decent books or webpages that > cover HV switcher design. Current requirements for the HVs are pretty meagre > - less than 10mA total. The big problem is the 6V heater supply that needs > to be isolated from (at the very least) the HVs. > > ('scuse the "posted by Oakmailer" tag; I'm sending this through webmail and > Oakmailer insists on tagging outbound mail) > > Thanks, > Phil. > > ----------------------------------------- > This message sent by OakMailer, a free/donation-ware script > provided by Oakbox Productions http://www.oakbox.com. > > Anti-spam notice, this message originated from IP Address: > 161.112.232.22 > ----------------------------------------- > -- > http://www.piclist.com PIC/SX FAQ & list archive > View/change your membership options at > http://mailman.mit.edu/mailman/listinfo/piclist > -- http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist