> I soldered out that component ( CS8900A ) and soldered it to 
> another board and it worked as it should.

Was it hand-soldered? Don't rule out the possibility of a bad solder
joint, I have seen things that were only visible with a x 20 loupe.

Wouter van Ooijen

-- -------------------------------------------
Van Ooijen Technische Informatica: www.voti.nl
consultancy, development, PICmicro products
docent Hogeschool van Utrecht: www.voti.nl/hvu
 

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist