Carlos A. Marcano V. wrote:
> 
>>
>> Hm, when I tested I was *not* able to lock myself out
>> from a F88 using the intosc/int-mclr test programs
>> from Wouter using a Wisp628. And I only used
>> the do-all command GO without any separate ERASE
>> command first.
>>
>> I think one have to stick to the PIC model we are discussing,
>> since there seems to be some differences between them.
>>
>> Jan-Erik.
>>
>>  
>>
> So, maybe I have been lucky with the 16F88? I am waiting the arrival of 
> another batch of F88's to make some tests.

I have a PIC program which uses all 8 PortA pins (incl /MCLR!) as 
digital input and all 8 PortB pins as output, and thus needs INTOSC.
I have used it (with only small differences to disable analog functions) 
with 16F88, 16F819, 16F648A and 16F628A all programmed with a Wisp628. I 
did not need a 'dongle' to reprogram any of these and also no separate 
erase.

Regards, Rob.

-- 
Rob Hamerling, Vianen, NL phone +31-347-322822
homepage: http://www.robh.nl/
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist