Hi,
  Does anyone happen to have any data on either of the following LCDs?
  
1) Hitachi SP21H002-Z1A. CCFL backlight, unknown resolution. About 30 pins on
   a flexcable connector. Graphics type, chip-on-flexcable.
2) Siemens/URT UMS-7011JD-YG. 16-pin 0.1" connector. Unknown resolution,
   believed to be graphics type, two blob-top controller ICs on the back.
   I've worked out the power pins, data pins and the LED backlight pin based
   on the board it was plugged into (see below), but I'm still stuck trying
   to find out what controller it uses and what the 4 remaining unknown pins
   do.

The UMS-7011 came out of a Siemens "OPe" 6SE9590-0XX87-8BF0 wall-mount
controller module. The module won't power up - it seems to be waiting for
some data to be sent over the RS232 (or RS422) bus before it will display
anything on the LCD panel. Does anyone know what protocol these things speak?

Thanks.
-- 
Phil.                              | Acorn RiscPC600 SA220 64MB+6GB 100baseT
philpem@philpem.me.uk              | Athlon64 3200+ A8VDeluxe R2 512MB+100GB
http://www.philpem.me.uk/          | Panasonic CF-25 Mk.2 Toughbook
... ----> If you cut here, you'll ruin your monitor. <----
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist