In SX Microcontrollers, SX/B Compiler and SX-Key Tool, rsenser wrote:

Hi all-

 

I seem to have hit a strange problem with Win XP and the SX-Key 3.x software.  The SX-KEY V3.x software works fine for me with Win Me and the SX-Key V2.02 works fine with Win XP.  However, with the SX-Key 3.0 or 3.1 IDE software, when I try to look at the configuration (with Run | Configuration...) I get one of two behaviors:

1)  If COM1 (only serial port on the PC) is busy, I get a dialog box with a title of "SX-KEY 3.10" and a message of "(X)  List Index out of bounds(0)".  Then the IDE just hangs.

2)  If COM1 is free, the IDE just hangs.

 

Oddly enough, in most cases the SX-Key V3.x software WILL program the SX-28

chip, via COM1 (but not always).  I would like to change some of the configuration settings -- so I really would like to get to the configuration screen.

 

Has anyone seen this before?  Any insights or guesses as to what is wrong here?

 

Any help appreciated.

 

Thanks,

Bob

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=88295

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2005 (http://www.dotNetBB.com)