Where do you get your Wisp628? Have you successfully program a
chip using it? I think you need to check the hardware.=20

I am not an expert in troubleshooting Wisp628 so I will leave=20
this to Wouter. I only used xwisp (python) for a few times on Linux.=20
I mainly use xwisp2 (C based) but I do not have the old 16F84A chip.

Regards,
Xiaofan

-----Original Message-----
From: Carlos A. Marcano V. [mailto:c.marcano@gmail.com]
Sent: Monday, September 12, 2005 9:59 AM
To: Microcontroller discussion list - Public.
Subject: Re: [PIC] Trouble programming 16LF648A using Wisp628


By the way, I just tried to flash an oldie 16F84A with the simple=20
b84a-2.hex file (blink-a-led sample for 84A from Wouter=B4s page)| and go=
t=20
this for answer:
...
Not encouraging, eh?

Then I tried it with the Xwisp2 but got the same problem as when I tried=20
with the other chip: the program just hanged and I had to terminate it.

Regards,

*Carlos Marcano*
-Guri, Venezuela-

--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist