> I find that the really small stuff fills with solder too 
> quickly - I use size #4, which is about 3mm
> wide - if I need a tiny bit I just cut it diagonally to a point.

Taste differ. My favourite way of soldering SMD's is to apply (slightly)
too much solder, then remove it with wick. I prefer the .030" / 1 mm
wide wick.

Wouter van Ooijen

-- -------------------------------------------
Van Ooijen Technische Informatica: www.voti.nl
consultancy, development, PICmicro products
docent Hogeschool van Utrecht: www.voti.nl/hvu
 

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist