In SX Microcontrollers, SX/B Compiler and SX-Key Tool, George Herzog wrote:

There is a special solder that you can buy form Digi-key [requires refrigeration and is shipped by courier].  You buy an adapter board, coat with this solder paste, stick the Sx-52 on the board, pop it in a cheapie toaster oven and the paste beads up and fuses to the appropriate places.

I believe I read all that at Seattle Robotics site.

Of course, don't eat toast out of that oven.

And, you are still going to pay out quite a bit for the special solder [$50USD] and the adapter boards.  But, you might stay under $100USD dependent on how many u need.

Of course, the Proto Board at less than $10USD look mighty interesting after considering all that.  [I bought 8.}

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=86586#m86594

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2005 (http://www.dotNetBB.com)