> > Working on it (at th emoment using an ARM, I don't think a 
> 16F or 18F
> > will be enough).
> 
> Really? From the last time I worked on a T6963 based LCD, the timing
> requirements were not so bad that it couldn't be handled by a parallel
> loaded shift register IIRC.

It does not have a controller.

> Power, GND, and 8 data lines seems like a good plan.

Dwarf Bus :)

But, as good as it sounds, there are things for which 8 data bits are
insufficient (like: RTL8019 Ethernet chip), or too many (see Stef's
design), or were just one ground/one data will not do.

Wouter van Ooijen

-- -------------------------------------------
Van Ooijen Technische Informatica: www.voti.nl
consultancy, development, PICmicro products
docent Hogeschool van Utrecht: www.voti.nl/hvu
 

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist