xwisp2 (under Windows and OS/2) are the best software for
Wisp628. It is a pity that it does not work under Linux now.

http://www.robh.nl

   XWisp2  -  by Rob Hamerling
                 =================================
                     XWisp for OS/2 and Windows

                 Copyright 2002,2004, R. Hamerling


 XWisp2 is a support program for the Wisp628 PIC programmer and WLoader.
 Basically it has the same purpose and functionality as the original
 programs  Wisp and XWisp of Wouter van Ooijen (http://www.voti.nl/xwisp),
 but XWisp2 is written in C-language and directly executable, without
 having to install Python or any runtime libaries. The original
 documentation of XWisp should be used as reference for XWisp2.
 This file describes mainly differences.

Regards,
Xiaofan

-----Original Message-----
From: A.Schouten [mailto:aatschouten@cs.com]
Sent: Friday, August 26, 2005 11:54 PM
To: Microcontroller discussion list - Public.
Subject: Re: [PIC] device identification 16f628a/wisp628
programmer/bumblebee prog software


Thank you for your reaction.
 MCLRE_OFF was in the header of the program all the time. I have not yet
used XWISP. I have initially use WINWISP, but this does not properly
recognise the a version of the 16f628. I could program a few times at
random, but finally I could not get through anymore. WINWISP recognises only
4 models PIC: 16f84, 84a, 27 and 28.
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist