On Aug 29, 2005, at 12:19 PM, Bob Axtell wrote:

> I have become disenchanted with 1/2oz copper as a primary conductor
> size. Since I always use 1oz in my normal designs, the action
> (mostly GND signal) of 1/2oz copper is not representative enough
> of the final product to be of any advantage.

I thought "standard procedure" for 1oz double-sided boards was to
start with 1/2oz laminate and build that up to 1oz thickness in the
process of making the Plated-through holes.  From a quick glance
at the AP site, they do the same.  Am I missing something?

BillW
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist