----- Original Message ----- 
From: "Dionis Teshler" <dteshler@hotmail.com>
Subject: Re: [PIC] Programmer doesn't burn all of the program


> of the problems. My PIC is being programmed with something like a 10v on 
> the MCLR! line and it is fine, I think that it is not that sensitive to 
> voltage

Watch out if you try different PICs.  I think there are some that will 
program with as little as 9V, but some need at least 12.1.  Some are 
specified as so many volts above Vdd.

--McD


-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist