In SX Microcontrollers, SX/B Compiler and SX-Key Tool, peterverkaik wrote:

Took a little longer, because the sources from sxlist.com would not assemble

using the latest SASM. In fact they contain errors: skip instruction followed

by compound statements. I fixed those errors. 

Also found a appnote AN23 that describes a setup using a SX28 for UDP messages.

I altered the iSXv1_0_4.src to make it assemble using a SX28, according to the

schematic in the AN23 document. (iSX_udp_for_sx28 folder).

At the Ubicom site, entering support, the documents describing the iSX and eSX

sources are not available, and I could not find them at sxlist.com also, but they

are, together with the fixed sources, in the zips.

Unzip both attachements to the same folder.

regards peter

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=84733#m85002

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2005 (http://www.dotNetBB.com)