In SX Microcontrollers, SX/B Compiler and SX-Key Tool, elliottearls wrote:

Hello-

I get an error message that states that the SXkey could not be found on the COM port 1 when I run a program. I have tried comport 2 as well.

I'm trying to run a program for the first time.  I'm using the Professional development board.
[list]*I'm using the Professional development board.* I have the sxKey plugged into the cable and the com port 1 *I have the sxKey plugged into the Board with the vss, vdd markings corectly aligned. * I have the power on (bluw LEDs by both the power switch and the pulse area. * I have the correct port selected in the software "device" dialog.

WHAT GIVES??? any help would be greatly appreciated... (this is the firstthing that I have done with stamps)

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=84675

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2005 (http://www.dotNetBB.com)