In SX Microcontrollers, SX/B Compiler and SX-Key Tool, juggler wrote:

Rsadeika,

Thanks for your reply.  I also have the SX Tech programmer, and I just tried it and get the same error when I use that.  While searching for the post you mentioned about the PDB and SX chips, I came across this thread:

http://forums.parallax.com/forums/default.aspx?f=7&m=83563

in which Ken stated that the SX Tech board cannot be used to program Sx18's because of pin differences when compared to newer chips.  In fact, one poster on that thread had the same error as I mentioned before (but it did not show up in my search).  I'll try Ken's suggestion of using a breadboard and wiring the connections up myself.  

This is all strange, though.  I know I programmed this thing (SX18) with one of my two boards!

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=84242#m84250

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2005 (http://www.dotNetBB.com)