Just download the attached zip file in the 2nd post
in the Microchip Forum. The exe file fsusb.exe inside
the zip archive is the one you want to use.
http://forum.microchip.com/tm.asp?m=106426.

You still need to install the filter driver of
libusb-win32.

To build this application, then you need to use
MingW/MSys. Please refer to the readmewin32.txt
inside the zip archive.

By the way, I have since re-flashed the bootloader
(actually the factory pre-loaded hex file) and 
un-install the libusb-win32 filter driver. I am
now able to use Microchip application (using
Microchip driver) as well as fsusb (using 
libusb-win32 device driver). You may want to 
try this as well (to reflash the bootloader using
an ICD2).

Regards,
Xiaofan

-----Original Message-----
From: Pierre B 
Sent: Monday, August 08, 2005 9:47 PM
To: Microcontroller discussion list - Public.
Subject: RE: [PIC] pb of device driver with the PIC18F4550

Hi,
 
I am following your instructions and I've made the changes to 
fsusb-0.1.11. But I don't understand how to use MingW. Which file
do I have to download? There are lots of files on the site!
It's maybe easy but I don't know how to build in Win32.
 
Thanks for help.
PiR
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist