>-----Original Message-----
>From: Mauricio [mailto:piclist-bounces@mit.edu] 
>Sent: 09 August 2005 22:40
>To: 'Microcontroller discussion list - Public.'
>Subject: [PIC] Very basic question about PWM
>
>
>Hi,
>
>            Quick question. If I have the PWM working and 
>outputting a signal on pin, let's say, RB3 (PIC16F88), Can I 
>read the status of the pin at portb<3> ? I mean, is the pwm 
>reflected on the PORT register?


I've not tried it, but the block diagram in the datasheet shows that this should work.

Regards

Mike

=======================================================================
This e-mail is intended for the person it is addressed to only. The
information contained in it may be confidential and/or protected by
law. If you are not the intended recipient of this message, you must
not make any use of this information, or copy or show it to any
person. Please contact us immediately to tell us that you have
received this e-mail, and return the original to us. Any use,
forwarding, printing or copying of this message is strictly prohibited.
No part of this message can be considered a request for goods or
services.
=======================================================================

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist