In SX Microcontrollers, SX/B Compiler and SX-Key Tool, Coriolis wrote:

First James is not an employee of Parallax and therefore does not have the ability to edit other peoples posts. Second there are rules of the road for participating in the forums. If you break any of the rules, the forum admins have the right and power to edit your post, just be thankful the didn't just delete it all together. 

My undertsanding is that the feature you desire was in one of the previous versions of the SX-IDE, but through lack of interest and use, it has since been removed (I am not certain this is the case so don't rail against them as if this were a proven fact). 

Your best bet is to take this discussion off of the forums, noone outside of Parallax can help you in this matter. Send an email to Ken Gracey and ask him very nicely if there is anyway you can get the specifications for the communication protocol that takes place between the SX-IDE and the SX-key. This of course would entail you writing a program to do this batch programming operation. The key is not to loose your head and maintain a professional and calm demeanor. They are under no obligation to provide this information to you and being beligerant, or even appearing so will almost gaurentee that they will not be cooperative.

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=82604#m83208

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2005 (http://www.dotNetBB.com)