Ok.... so I managed to work it out. It turned out that I had forgot to se=
t some cs lines to output state - stupid me.

If anyone has got problems with this display, then let me see if I can he=
lp. I've noticed quite a few questions on the matter in the archive, but =
no solutions...

Best regards,
S=F8ren

> -----Original Message-----
> From: piclist-bounces@mit.edu=20
> [mailto:piclist-bounces@mit.edu] On Behalf Of S=F8ren Knudsen
> Sent: 4. august 2005 09:38
> To: Microcontroller discussion list - Public.
> Subject: [PIC] Is anybody familiar with the sed1520 lcd=20
> controller chip?
>=20
> Hi,
>=20
> I am having problems with getting a graphical lcd (32x122 px)=20
> with a controller chip of the type SED1520 to do anything=20
> meaningful. Does anyone have some sourcecode that deals with=20
> this controller? -preferable assembler. I should also mention=20
> that some of the pins are hardwired to ground so I am fx only=20
> able to write to the display, not read from it. I dont know=20
> why the display maker (everbouquet) has chosen to that. Btw:=20
> the display type is MG1203D-SYL.
>=20
> Best regards,
> S=F8ren Knudsen
>=20
> --=20
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>=20

--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist