There is an interesting project being designed
collaboratively on the Parallax Forums at
http://forums.parallax.com/forums/default.aspx?f=15&p=7&m=76791
with topic of "Community supported PCB milling
machine".

May be of interest to you too.

--- Philip Pemberton <philpem@dsl.pipex.com> wrote:

> Hi folks,
>   My PCB drill has finally given up the ghost - the
> bearings are utterly
> shot, the drill bit vibrates like mad, and the cost
> to repair the damn thing
> makes a CNC look cheap.
> 
>   So, what are you guys using to drill PCBs? I've
> been looking at the Dremel
> 285VC and 395VR - is anyone using one of these to
> drill PCBs? Are they any
> good?
> 
> Thanks,
> -- 
> Phil.                              | Acorn Risc
> PC600 Mk3, SA202, 64MB, 6GB,
> philpem@philpem.me.uk              | ViewFinder,
> 10BaseT Ethernet, 2-slice,
> http://www.philpem.me.uk/          | 48xCD, ARCINv6c
> IDE, SCSI
> ... What if there were no hypothetical questions?
> -- 
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
> 



-Hasan
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist