>
>BTW, running those numbers with the *maximum* Rs of Mark's crystal (taken
>from the datasheet) and a calculated load capacitance with 33pF caps
>(calculated CL = 22pF) yields an estimated maximum drive power of 3.8mW, well
>above the datasheet 1mW maximum rating of the crystal. That's the problem,
>Euros to donuts.

I commonly include a series resistor on the output pin,  for 
adjusting drive level, and checking oscillator margin.

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist