In SX Microcontrollers, SX/B Compiler and SX-Key Tool, skinnydude wrote:

Ok, I got the SX28AC/DP to work with the pesky card reader that the Basic Stamp couldn't read.  Now what I want to do is build a board with the SX28AC/SS and connect some of the I/O pins to a card reader and some other I/O's to a serial port to transfer the data to a PC.  Also, if possible, I want to be able to update the code (in case there's any firmware bugs) on the chip itself through a serial port or some other method via the PC without using the SX-Key.  Is there any way to do this fairly inexpensively?

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=80735

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2005 (http://www.dotNetBB.com)