Thanks Olin - this is a personal project though.

My "bread and butter" products use standard 16F627 and 18F1320 which my good
old trusty PS+ supports.

When the money comes rolling in (eventually) I'll probably upgrade to a PM4
and/or ICD2

I had a feeling I'd reliably get around 50k samples per second - I had a
look at the datasheet but its always reassuring when people confirm it.

Thanks guys

Dom 

-----Original Message-----
From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] On Behalf Of
Olin Lathrop
Sent: 11 July 2005 19:31
To: Microcontroller discussion list - Public.
Subject: Re: [PIC] Analogue to Digital converter speed on an 18F series

Dominic Stratten wrote:
> I'd consider using the dsPIC range but my programmer wont support them 
> so I'm stuck with the 18F series.

You could always get a programmer that does support the dsPICs.  If this is
a commercial project, then the cost of a dsPIC programmer is negligeable.
My ProProg (http://www.embedinc.com/products) can do dsPICs for $295.  ($200
if you can catch one of us at Masters before the limited quantity at that
price is sold out.)


*****************************************************************
Embed Inc, embedded system specialists in Littleton Massachusetts
(978) 742-9014, http://www.embedinc.com
--
http://www.piclist.com PIC/SX FAQ & list archive View/change your membership
options at http://mailman.mit.edu/mailman/listinfo/piclist

--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.8.11/45 - Release Date: 09/07/2005
 

-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.8.11/45 - Release Date: 09/07/2005
 

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist