>-----Original Message-----
>From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] 
>Sent: 06 July 2005 14:18
>To: Microcontroller discussion list - Public.
>Subject: Re: [PIC] Multiple F88 slaves on I2C buss
>
>
>> The image dosen't have enough resolution to say one way or 
>the other, 
>> but the data goes high somewhere very close to the falling 
>edge of the 
>> 2nd clock pulse after the start condition.  I'd want to zoom in and 
>> check the timing there is ok
>

Well, I guess that's ok then!

Cheers

Mike

=======================================================================
This e-mail is intended for the person it is addressed to only. The
information contained in it may be confidential and/or protected by
law. If you are not the intended recipient of this message, you must
not make any use of this information, or copy or show it to any
person. Please contact us immediately to tell us that you have
received this e-mail, and return the original to us. Any use,
forwarding, printing or copying of this message is strictly prohibited.
No part of this message can be considered a request for goods or
services.
=======================================================================

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist