In SX Microcontrollers, SX/B Compiler and SX-Key Tool, labtronix wrote:

Hello all members of this Forum;

My name is Filipe and i am New in programming MCU and new in this forum !!!

I nee know if any one make teste with the code DTMF Receiver for SX28 in down load section of Parallax?

I need any help for make this code:

The sx28 receive the Sound of DTMF for A/D pin or receive the ( 4  bits from MT8870 DTMF decoder ) is more dificulte with out MT8870 but less expensive to build !!! 


Ok the project is:

send for ex. 12345# or 12345* DTMF code 

12345# put HIGH some PIn of the SX28 ( ex. pin 4 )
12345* put Low the same pin of SX28 ( pin 4 )

The caracter # and * are the enter key
 
If I sent wrong code, the SX28 put HIGH other Pin ( ex. Pin 5 ) and check one more time DTMF code and if the codes are again wrong put High other Pin ( ex. pin 6 )
 
I dont know is the original code SX28 receiver and decoder DTMF code with out any other IC DTMF decoder of Chris are OK !!!


Regards for all;

Filipe

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=79099

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2005 (http://www.dotNetBB.com)