>-----Original Message-----
>From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] 
>Sent: 14 June 2005 13:30
>To: Microcontroller discussion list - Public.
>Subject: Re: [PIC] What type of connector is ICD2 ?
>
>
>RJ12.  I'm a huge proponent of getting rid of it, though.  I 
>made a cable which replaced the RJ12 end with a SIP connector.
>
>Of course, that SIP connector's pinout also matches that
>of my WARP-13a, so double trouble.  ;-)  It's also much
>easier to put on a breadboard and much easier to find board 
>real estate for than an RJ12.
>
>Mike H.

I  made an RJ12 to Dsub 15 coonector so I could use all the promate 2 cables I'd previously made!

Regards

Mike

=======================================================================
This e-mail is intended for the person it is addressed to only. The
information contained in it may be confidential and/or protected by
law. If you are not the intended recipient of this message, you must
not make any use of this information, or copy or show it to any
person. Please contact us immediately to tell us that you have
received this e-mail, and return the original to us. Any use,
forwarding, printing or copying of this message is strictly prohibited.
No part of this message can be considered a request for goods or
services.
=======================================================================

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist