> bearing in, and clip back together. Don't know how you opened the
> ping pong ball

Scalpel

> but I see potential problems sealing it again so you do not loose the
> ball bearing. These may help that scenario.

I could epoxy or silicone a lid on it but the box I have in mind would
cover the top anyway. Even slightly less than 1/2 height is too high.
The b-b won't touch the lid until the whole thing is tipped over at > 70
degrees, which is not how one would park a vehicle. On purpose. I
can work out the exact height with trig or a scale diagram

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist