A 4.096V 1% precision voltage reference is under a buck at:

http://www.voti.nl/shop/catalog.html




________________________________________________
Get your own "800" number
Voicemail, fax, email, and a lot more
http://www.ureach.com/reg/tag


---- On Fri, 27 May 2005, Spehro Pefhany (speff@interlog.com)
wrote:
> 
> Or, if you have control over the power supply, consider using
a better
> regulator for Vdd, especially if there is not much else
running off it.
> 1% and 0.5% tolerance regulators are easily available, and
provide an
> intermediate unadjusted accuracy option between a typical 5%
supply and
> a pricey +/-0.1% reference.
> 
> Best regards,
> 
> Spehro Pefhany 


> At 12:10 PM 5/27/2005 -0400, you wrote:
> 
> 
> >That's close enough for my application, but maybe not yours. 
In
> >that case, use a 4.096 or other value precision voltage
> >regulator.
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist