On Fri, 27 May 2005 09:54:30 +0200 (MEST), Jan-Erik Soderholm
<jan-erik.soderholm@telia.com> wrote:

>Michael Rathbun wrote :
>
>> Hooking a logic analyzer up with the 20MHz can installed, I 
>> see that if I don't have an LED load on the software PWM
>> pins, they show the expected waveforms.  Plugging in the
>> LED load, I see a narrow pulse every now and again,
>> but nothing like normal.
>
>R-M-W ?

The LEDs in question are pulled high through 100 ohms by port c lines, and
the software PWM output is done with bsf and bcf instructions during the
timer1 interrupt.


-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist